Vu meter needle alignment?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Golgoth

Well-known member
Joined
Jul 24, 2015
Messages
321
Location
Paris, France
Hi everyone,

My Chandler Mini Rack Mixer left channel Sifam Vu Meter's needle is positioned slighty above 0 when no audio is passing through or turned off. The right channel is right on point.

Is possible to align it manually to 0 to have both channels calibrated equally?

Capture d’écran 2021-11-26 à 22.01.32.png
(Could not find the VU's reference on Sifam documentation but here is the actual model)

Thanks!
G
 
Most meters have the zero adjust on the front , try prising out that rubber or plastic stopper to the left and right of the meter movements and see whats underneath . Going at it from behind you could very easily make a hames of it.
 

Latest posts

Back
Top