We built a mixer...again!

[Igor]

At this time, just a crazy DJ mixer.

Each channel contains stereo Sontec EQ, relay based effects router
with dry/wet assign, than 2181 VCA based cross-fader,
variable state VCF's on board, built-in "isolator", discrete phono pre's....etc...

Total conceptual design: Yaron (DJ TRAXX)
The rest by IJ

Special thanx to:

Sergey for hard work and patience,
Jennie for inspiration and positive emotions,
Emily for friendship and PR.

Pictures here:

http://s251.photobucket.com/albums/gg291/diy33609/DJ_MIXER

 

[Lowfreq]

:shock:

 

[mcfarlane_audio]

VERY very very nice, i know a few djs who would kill for that

 

[CroatianSensation]

[quote author="Lowfreq"]:shock:[/quote]

Nuff said!!

:thumb:

 

[mushy]

My only critism is the rotory x-fader. No good for droppin the breaks. Other than that, TOTALLY SICK!!!

 

[EEMO1]

that's fu**ing nuts if you ask me!

 

[rob_gould]

:shock: :shock: :shock:

That's unbelievable!

My own preference in a DJ mixer is for normal straight faders and crossfader, but even so, I'd love to try out that bad boy :thumb:

 

[Igor]

VERY very very nice, i know a few djs who would kill for that

Send them to us, we're Addams....
TO KILL OR TO DIE FOR MIXER....OR BOTH TOGETHER!!!!

My own preference in a DJ mixer is for normal straight faders and crossfader, but even so, I'd love to try out that bad boy
...........
My only critism is the rotory x-fader. No good for droppin the breaks. Other than that, TOTALLY SICK!!!

For normal Bozak guys, it is ROTARY'S.

For Pioneer dj's, there's a 2RU fader box.
2xDB-25 connectors and Pioneer faders, x-fader, pan, etc.

BTW, we found x-fader assign (1-mix-2) is very usefull for
such drops, in case you're on filter mode it's killer.
Both filters have 3 states, btw: LP left/right, HPleft/LPright, HPleft/right.

that's fu**ing nuts if you ask me!

Nope, we're BOLTS.

 

[noulou]

:shock: :shock:


You're an animal lover too!!

http://i251.photobucket.com/albums/gg291/diy33609/DJ_MIXER/20.jpg


Great stuff, as usual Igor.
Pultecs and Sontecs for a DJ rig. Lucky club-goers!

 

[jensenmann]

way too much EQ in the hands of a DJ. He´s going to kill a lot of PAs. Stay away from me with that

:grin: :thumb:

 

[radiance]

[quote author="jensenmann"]way too much EQ in the hands of a DJ. He´s going to kill a lot of PAs. Stay away from me with that

:grin: :thumb:[/quote]

Agreed...Very nice build though.

 

[natek]

[quote author="noulou"]


You're an animal lover too!!

http://i251.photobucket.com/albums/gg291/diy33609/DJ_MIXER/20.jpg

[/quote]


:green: :green: :thumb: :thumb:

Nice Job Igor! While everyone else is distracted by our rack gear projects you have gone and done it again!

 

[peter purpose]

Stare at the picture. After about 30 seconds you should begin to see a man appear next to the woman. Quite remarkable.

 

[feza]

I've seen more projects from you, impressive work man. Just wanted to say you are a very gifted person. :wink:

 

[justanalogue]

this is so sick!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

No it isn't but what a build!

I am glad there is some real craftsmanship going on in this "disposable world".

Please keep going!

Willem.

 

[bluezplaya]

Damn, when you're not building bad ass mixers...you're a PLAYA!

 

[khstudio]

Wow... you are either Very fast at building & designing gear or you've got some elf's working when your asleep.

KILLER work man & thanks for sharing the Sontec EQ's with us!
Mine's about 80% done... can't wait to hear it.

:thumb:

 

[RedNoise]

:shock:
wanna be a dj now!!!!
:green:

 

[nrgrecording]

All thumbs up! Thats great! :thumb:

BUT... Iam not sure if this is a genuine igor project? The pipe is missing? :!: :!: :!: :?: :green:
The frontpanel was made of 2-lyer Gravoply? Looks amazing!

Frank.

 

[Igor]

Hi Frank, you're right, forget to put a pipe on a mixer...
Next time will fix it...
What is gravoply?
Here, yellow plexi ("cast" type) used, painted from back with
black heat-resistant "barbeque" spray paint, engraving mirrored.
Nitro spray is no good on plexi.