• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Workshop moving clear-out : compressors, effects, and some free stuff

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

zebra50

Well-known member
Joined
Jun 4, 2004
Messages
2,943
Location
York, UK
Edited 17 April 2021

More stuff from our workshop clearance! Feel free to make offers.

I will post at cost.  Some of the things are heavy but generally I can send most things within the UK for £12, and Northern Europe for £25. Please ask for rates around the world.


Old Philips reel tape player

ST041_PhilipsTape-1-150x150.jpeg


Plays but does not re-wind. Sounds a bit weak but that could be the old tape. Treat as spares/repair. £20 plus post.

More details and pictures at http://xaudia.com/shop_item/philips-tape-recorder-st041/


FAL Phase 50 mkIII amplifier head

ST042_FAL_amplifier-1-150x150.jpeg


Old British amplifier head with 4 channels. Powers up, otherwise untested. £50 plus post

More details and pictures at http://xaudia.com/shop_item/fal-phase-50-mkiii-transistor-amp-head-st042/


Original Gibson case for Explorer guitar - SOLD

Explorer-1-1-150x150.jpeg


Very solid old original Gibson case. Designed for a wide guitar with a slanted body, assumed to be for an Explorer model. A bit scruffy outside and needs new clasps. Very clean inside.

More details and pictures at http://xaudia.com/shop_item/gibson-guitar-case-explorer-st043/


East German Reissmann / REI mixer amplifier

ST044_Rei_Mixer_Amplifier-1-150x150.jpeg


25 watt valve mixer amplifier. Not tested.
I believe these can power Reissmann tube microphones. Very heavy!
£199 + post.

More details and pictures at http://xaudia.com/shop_item/rei-reissmann-kr60-mixer-amplifier-st044/


Ferrograph tape reels

ST032_FerrographTape-1-150x150.jpeg


Ferrograph branded tape reels - £20 plus post.

More details at http://xaudia.com/shop_item/ferrograph-tape-reels-st032/


MELODIUM TRANSFORMERS

melodium_trannys-1-150x150.jpeg


Assorted matching transformers from Melodium. Made in France. Good condition.  £25 each.
(a quick search found some on evilbay at £45 each)

Type 202s are SOLD

Type TR180 is low impedance mic to high impedance input or tube grid, with a turns ratio around 1:80. Two available.

E80EF is low impedance mic to high impedance input or tube grid,

(ratios based on square root of inductance ratio at 1 kHz.)

more details at http://xaudia.com/shop_item/melodium-transformers-various-st029/


STUDIOMASTER UFEX DUAL STEREO COMPRESSOR

ST025_Studiomaster-8-150x150.jpeg


Twin stereo compressors. That is 4 channels of VCA compression for £90 plus post.
Working but the left input gain pot is scratchy - you may want to replace that.

More pictures at http://xaudia.com/shop_item/studiomaster-ufex-dual-stereo-compressor-st025/


CALREC CM10 CONDENSER MICS - working but noisy

x398_CalrecMics-1-150x150.jpeg


Tested - working but noisy. £60 each plus post.
Pair of Calrec podium condenser microphones, they work and sound OK but too noisy (hiss) to sell as fully working. Hence selling as spares/repairs. To be honest it is a common problem with Calrec mics.
I have used these on snare drum where signal to noise is not an issue.
Nice cosmetic condition. XLR output. 48V phantom powered.

More pictures at http://xaudia.com/shop_item/calrec-cm10-condenser-mics-x398/


Apart 100v to 8 ohm speaker transformers
For PA system. £5 each + post. I have at 5 of these.

ST015_SpeakerXFOs-3-150x150.jpeg


More photos at http://xaudia.com/shop_item/apart-t20ip-speaker-matching-transformers-st015/



I will list more things as and when I find them.

Please ask questions through the forum.

Stuff is located in the Republic of Yorkshire, UK.

As always I am open to offers, haggling, bribery, coercion, corruption, extortion, and blackmail.

Payment by paypal or I can send a card payment link.

Cheers!
Stewart
 
Stewart, your thing #1 seems to be floating. It's not the first time things on GDIY float.... why do you guys always power up with electricity from your showy antigravity generators....
 
If you look closely you can see a potato chip shaped like the Pope's 1st cousin in the wood grain
wild stuff ! You know if the Big guy likes tubes they gotta be good!
 
WowI this is amazing.

Thomas has just bought Thing 1 and Thing 2, so he gets the magic floating Voodoo.

Party on!
 
Good question!
I'm at home now but will measure and report back tomorrow.
Stewart
 
Hi Tube Monkey!

It's a few kg and I don't think it will be cheap to ship - maybe £30 or so. Can you please PM me your delivery address? I will try to get an accurate shipping quote for you once I have your post code.

Cheers
Stewart
 
Estimated around £11 by UPS... perhaps a touch more. It is rather heavy and bulky, but usually UPS move most things for £11.

Cheers
Stewart
 
A few bits sold and a few bits still available. Please make offers if you want anything!
Stewart
 
Hi! 4 years later and I am having another clear-out - more stuff added and more to come.
Hope you are all OK.
Stewart
 
zebra50 said:
I don't know what this is
Looks like some kind of rack mounted monitor, but all the speakers are missing. Some nice meters and other parts inside. If you pay postage then you can have it. Otherwise it will go to the tip. :-(

ST009_thing-1-150x150.jpeg


More photos at http://xaudia.com/shop_item/amu-gb1-d-i-dont-know-what-this-is-st009/

I can take that.
How much is the postage to Lisbon, Portugal?

Thank you so much
 
Hi Whoops!

Good stuff. It is yours. I'll get a postage quote for you tomorrow, but it is quite heavy and I would guess around £25.

Would you please PM or email your address to me so that I can get an accurate quote?
Thanks
Stewart
 
zebra50 said:
Hi Whoops!

Good stuff. It is yours. I'll get a postage quote for you tomorrow, but it is quite heavy and I would guess around £25.

Would you please PM or email your address to me so that I can get an accurate quote?
Thanks
Stewart

thank you

pm, sent
 
Back
Top