WTB DPDT Switch , where can I find those ?

[madreza]

Hi Guys ,
any idea of where to find those right angle dpdt threaded switch ?????
those are for Igor's DI PCB

thanks

 

[kosi]

They are called

DPDT Miniature Toggle Switch - Vertical R/A

 

[madreza]

Thanks Kosi for your reply

The problem that I have is that either I find the switches threaded Right angle but in ON-OFF-ON config. or I find ON-ON but not threaded !
and of course I need them ON-ON threaded

 

[madreza]

OK, My bad ,
after a few hours of research , found that .......
http://www.mouser.fr/ProductDetail/E-Switch/100DP1T1B1M7QEH/?qs=sGAEpiMZZMvudeGI7i40XFnXcII8zX6Lf6QRxaCglms=
it should work
but if somebody has a cheaper solution .... I take it

 

[chefducuisine]

The combination threaded and angle-mounted to a PCB is just asking for trouble as you will put stress on the solder joints when tightening the switch to the front panel...

If you need a threaded one why not just use a normal (straight) one and connect it via some short wires to the PCB.
You will mount the switch to a front panel anyway...
The standard DPDT ON-ON are available almost everywhere and are easier to replace if the switch breaks in the future.


See here for what I mean:
http://www.reichelt.de/Kippschalter/MS-500F/3/index.html?ACTION=3&GROUPID=7584&ARTICLE=13160&OFFSET=16&SID=96WEXbrKwQATMAAFLlkrM9ae77cfc1aa306ca6192efcf4e3ef893&LANGUAGE=EN

 

[Whoops]

Hi Guys ,
any idea of where to find those right angle dpdt threaded switch ?????
those are for Igor's DI PCB

thanks

Believe me, I searched a lot for that and the only place that has those switches for sale is JLM Audio.
Joe has them made custom for them.
you can buy them here:

https://www.jlmaudio.com/shop/toggle-dpdt-pcb.html

This switches are high quality they are made with a special low level audio contact surface, not your ordinary switch