youngsinsei
New member
How does one purchase this build kit?
It's not a kit, but [silent:arts] sells the PCB (send him an email). You'll need to source the parts yourself but there's a BOM linked in the first post and plenty of info in this thread.How does one purchase this build kit?
Do you have any photos to share of this setup? I'm interested in seeing how this looks!Just to follow up on this, I ended up using an Antek AS-05TC250 . I cut the lead of the 5v on the transformer and jumpered the second 6.3v to the 5v Relay rail at the terminal blocks ( The 5v tap would've been a little too close for comfort to the drop out voltage on the regulator I used). This works well and is inexpensive (currently $32 + 8.5 shipping) for US buyers.
Sure. It's not a great photo but you should be able to see the jumper between the Channel 2 heater and the relay input. Later on I connected wire from that same terminal block to power the vu lamps. They're pretty bright even at the heater voltage.View attachment IMG_0148.jpegDo you have any photos to share of this setup? I'm interested in seeing how this looks!
Enter your email address to join: