Hi Raphael,
I was able to program the FPGA with a FT2232 module. But I'm having problems programming the xmos - I'm getting the following error message:
Last line I get is:
XFlash_Utils::BuildRunCommand : xrun --io --adapter-id GsZEwYzh spiinfo-10d251f5
And then this error message:
xrun: First stage multi-node boot failed, please check XN file and Xmos link connectivity
It looks like the xtag programmer see's the infinitas board and it tries to flash the memory but after some time of trying I get that error message. Not sure where to go on from here, do you have any ideas where to look? I reflowed the chips and some other parts of the circuit but no change there...
This is quite a complicated project for me, soldering is very hard imho and setting up for programming took me days
Best regards,
Mathias