Well, after some blood sweat and tears, I guess it's finally "done". Sounding excellent, mostly due to Nenad Patkovic's acoustic designs (https://sl-si.facebook.com/NenadLP). It's a small songwriting / mixing affair with allowance for small tracking and overdub projects as well. Feels cosy and much larger than it actually is.
Thanks to everyone who helped me make the DIY gear pieces there is more but we only photo'd the almost full bottom rack. I'll get more pics up once we fill that up.
In the desk we have 2x LA3A 500 from Peter, DLA2A and 2x Jensamp from silent:arts, TB's TBDD, two peterc stereo s800, one stereo nite eq3d and a stereo 160vu from abe. In the upper rack there is a Fester's TG1 with Carnhill iron and 8x bruno2000 dual mid Neve 1084, modified to separate line and mic input transformers. The lower rack has two SSL 9000 and two JLM 99*MB which have been modified (butchered) to twin servo schematic with 990c's. Probably going to ditch the SSL and go for four twin servos. Love the clean but muscular tone with haufe in and lundahl out in it. Then we have Bernd's rude tube, PRR 176 stereo, two 1176 rev d with UTC A inputs, an 1176 rev a, two turret built pultec eqp1, two drip's redds, quite modified (input attenuator instead of between stage pot, no 0a2 in power section, +48V phantom power, termination mods..). There are also four channels worth of soundskulptor's stereo tape simulators, modified with tubefreak's advice to 12 voices instead of original 3 and four SSL 5000 re-racked EQs.
So yeah guys, anyone else got their place done recently? Care to share some pics?
Thanks to everyone who helped me make the DIY gear pieces there is more but we only photo'd the almost full bottom rack. I'll get more pics up once we fill that up.
In the desk we have 2x LA3A 500 from Peter, DLA2A and 2x Jensamp from silent:arts, TB's TBDD, two peterc stereo s800, one stereo nite eq3d and a stereo 160vu from abe. In the upper rack there is a Fester's TG1 with Carnhill iron and 8x bruno2000 dual mid Neve 1084, modified to separate line and mic input transformers. The lower rack has two SSL 9000 and two JLM 99*MB which have been modified (butchered) to twin servo schematic with 990c's. Probably going to ditch the SSL and go for four twin servos. Love the clean but muscular tone with haufe in and lundahl out in it. Then we have Bernd's rude tube, PRR 176 stereo, two 1176 rev d with UTC A inputs, an 1176 rev a, two turret built pultec eqp1, two drip's redds, quite modified (input attenuator instead of between stage pot, no 0a2 in power section, +48V phantom power, termination mods..). There are also four channels worth of soundskulptor's stereo tape simulators, modified with tubefreak's advice to 12 voices instead of original 3 and four SSL 5000 re-racked EQs.
So yeah guys, anyone else got their place done recently? Care to share some pics?