So, I recently found a passive compressor schematic on the internet. The idea piqued my interest, so I decided to build 4 into a single space and then use transistor gain stage afterwards with a potentiometer wired as a variable resistor to control the make-up Gain/volume. I've provided both schematics and was wanting to make sure this would work.
I am using a BC547 transistor for my gain, and a 10k Linear potentiometer as my output volume control. I decided to use the single transistor buffer as it would also convert my signal to a low impedance and help with connecting it to my AD converters without impedance matching issues.
I am using a BC547 transistor for my gain, and a 10k Linear potentiometer as my output volume control. I decided to use the single transistor buffer as it would also convert my signal to a low impedance and help with connecting it to my AD converters without impedance matching issues.
Attachments
Last edited: