O obetech New member Joined May 2, 2010 Messages 3 May 2, 2010 #1 Hello All, Could somebody explain me which resistors use to 16 channels input in NEUMANN 472-2 (without rg, not A,B,C) and can I use just potentiometer to pan mono signals Thanks
Hello All, Could somebody explain me which resistors use to 16 channels input in NEUMANN 472-2 (without rg, not A,B,C) and can I use just potentiometer to pan mono signals Thanks
pucho812 Well-known member Joined Oct 4, 2004 Messages 14,948 Location third stone from the sun May 2, 2010 #2 if your planning on building a passive summing mixer and using the Neumann's as make up gain then do some searching on here there are plenty of ideas on how to build a summing mixer.
if your planning on building a passive summing mixer and using the Neumann's as make up gain then do some searching on here there are plenty of ideas on how to build a summing mixer.
J joe333 Active member Joined Nov 28, 2009 Messages 39 May 2, 2010 #3 Hi I think 5k1 works fine in all models.
O obetech New member Joined May 2, 2010 Messages 3 May 3, 2010 #4 resistor values for the inputs is 5k11 for 472-2 without any letters?