software frequency analyzer

shop deals on amazon
Shop deals on ebay
Advertise with us
GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
M

mulletchuck

Well-known member
Joined
Jan 9, 2010
Messages
1,132
Location
Midwood, Brooklyn, NYC
Does anyone have a software frequency analyzer that they use, if they don't have access to an AP or similar device?  I've been using Blue Cat Audio's plugin, and logic's Signal Generator plugin, but i'm wondering if there are any other pieces of software I can use to create frequency plots of my gear at various settings, that don't involve expensive pieces of hardware.
 
mulletchuck said:
Does anyone have a software frequency analyzer that they use, if they don't have access to an AP or similar device?  I've been using Blue Cat Audio's plugin, and logic's Signal Generator plugin, but i'm wondering if there are any other pieces of software I can use to create frequency plots of my gear at various settings, that don't involve expensive pieces of hardware.
Click to expand...

Smaart.
 
I've been using RMAA for years. It's a bit touchy on sound card drivers but it's worth the hassle to make it run at 96khz for extended measurements. And remember to install it in adminstrator mode.

http://audio.rightmark.org/products/rmaa.shtml
 
I've been using Fuzzmeasure - works very well. It's a swept sine wave method.

http://www.supermegaultragroovy.com/products/FuzzMeasure/
 
Kingston said:
I've been using RMAA for years. It's a bit touchy on sound card drivers but it's worth the hassle to make it run at 96khz for extended measurements. And remember to install it in adminstrator mode.

http://audio.rightmark.org/products/rmaa.shtml
Click to expand...

I used to use RMAA for everything, but then it crapped out on me. It will no longer recognize me EM-U card, so I had to ditch it for ARTA, which is okay. ARTA is nice because it's real time, VS RMAA, which does a sweep and then shows the end results.
 
don't forget TrueRTA.

It's cheap and the non-free versions work with correction for your specific soundcard (like rmaa) butit's in real time.

At least it works very well for me.

http://www.trueaudio.com/rta_selection_guide.htm
 

Similar threads

pucho812
The fight with windows
Replies
14
Views
495
grid_stopper
grid_stopper
Electrobumps
Lexicon 480L - eproms V4 software upgrade
Replies
1
Views
467
radardoug
radardoug
P
Live Record for Radio Broadcast with gear I built.
Replies
1
Views
6K
Ricardus
Ricardus
F
Best universal front panel software compatible with industrial standards
Replies
8
Views
683
GermanTech
G
trobbins
Vintage Mic Transformer for MC step-up - gain-phase and impedance measurements
5 6 7
Replies
130
Views
7K
Cqwet Dbdfte
Cqwet Dbdfte

Latest posts

Back
Top