Add a mix control pot to old Whammy pedal ?

Shop deals on ebay
Advertise with us
shop deals on amazon
GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
F

frankiev

Member
Joined
Jul 23, 2014
Messages
6
I have an old Whamyy pedal . Not sure which generation it is but its small and black rather than the red ones . It has an effect only and dry only output jacks . Id like to add a mix control pot for dry/effect . I know how to wire it but I have no idea what value pot to use . Can anyone advise on this
Thanks
 
If it were me, I would make a little external box instead of modding the (possibly collectible) Whammy.

Do you have a reason for wanting it built-in?

Either of these will easily fit in a 1590a:

http://tagboardeffects.blogspot.com/2012/02/split-n-blend.html
http://tagboardeffects.blogspot.com/2012/01/mini-blend-jfet.html

Pot will be linear, by the way. I would start with 100K.
 
That was my idea also . A little external box with 2 1/4 in jacks .
Thanks for the suggestions 
I was thinking a pot with the dry on the left leg ,the mix on the right leg ,and output from the center wiper . That wouldnt work?
 

Similar threads

C
Accessing pcb mounted pots to de-oxidise
Replies
4
Views
494
sodderboy
S
usbdevice
Cloning a 1968 Silicon Fuzzrite
2
Replies
31
Views
1K
usbdevice
usbdevice
P
SMPS considerations for guitar pedal effects
2
Replies
31
Views
3K
ppa
P
Clay Pruitt
Should both L and R channels of a Main Mix Fader be exactly the same resistance readings?
Replies
4
Views
582
Whoops
Whoops
JimJhn
Korg NanoKontrol DIY Modification Question
Replies
16
Views
1K
JimJhn
JimJhn

Latest posts

Back
Top