Rocinante
Well-known member
What software are you guys using for 3D printing?
Is there a software that has a library?
Ive been using some freeware which has been good but the library is just shapes.
I bought my son a nice 3D printer and I want to make a casing for a vu meter similar to the 8027 hairball sells but wider and a few millimeters taller. So basically 1u in height.
I want to stick a tft/lcd display in it that I made a nice digital vu meter with on an arduino (which I'll gladly share the code for) . The code is mostly from
With which I manipulated for my own purposes.
The lcd vu meter also has volume level indication with numeric digits that so far work well (let's see what happens when someone wacks it while sticking it in a rack)
The height is 1.70 inches by 2.25 in width.
It's 1000 times more accurate than an analog vu meter and it looks pretty.
It's going in my 3 in 4 out monitor controller.
I tried to find a vu meter casing that would fit but no such luck. I'm trying to keep it 1u.
Is there a software that has a library?
Ive been using some freeware which has been good but the library is just shapes.
I bought my son a nice 3D printer and I want to make a casing for a vu meter similar to the 8027 hairball sells but wider and a few millimeters taller. So basically 1u in height.
I want to stick a tft/lcd display in it that I made a nice digital vu meter with on an arduino (which I'll gladly share the code for) . The code is mostly from
With which I manipulated for my own purposes.
The lcd vu meter also has volume level indication with numeric digits that so far work well (let's see what happens when someone wacks it while sticking it in a rack)
The height is 1.70 inches by 2.25 in width.
It's 1000 times more accurate than an analog vu meter and it looks pretty.
It's going in my 3 in 4 out monitor controller.
I tried to find a vu meter casing that would fit but no such luck. I'm trying to keep it 1u.