I'm wanting to implement an attack control for a Urei BL-40 in it's peak limiter section (which is relatively similar to an 1176). As it is right now, it's set for an extremely fast (5 microsecond) attack, much faster than the fastest setting on an 1176. I would like some type of control to be able to increase the attack time from 5 microseconds up to around 800 microseconds. Here's a schematic of the peak limiter section:
In the manual, there is suggestion for making the release shorter by reducing the value of C35. I'd like to possibly add a switch to give a longer option on it, but the attack is my main concern. Any suggestions are welcome.
Craig
In the manual, there is suggestion for making the release shorter by reducing the value of C35. I'd like to possibly add a switch to give a longer option on it, but the attack is my main concern. Any suggestions are welcome.
Craig