Silvas
Well-known member
Hello!
The studio´s amek 9098 has channel 1 with an ugly distortion at the output, both on DI and mic modes, channel 2 is OK. The pre works for a while then the sound is completely broken...but the metering seems OK on both channels, i mean, the metering doesn´t show signs of low signal or reduced dynamic range or headroom or something, it responds exactly as the channel 2 meter with the same signal applied....
The pre had this exact failure a year ago and was fixed by RME in the florida, but this time is quite expensive to send it again so any help would be GREATLY appreciated!
Any info on this pre such as topology and design details would be very useful too, thanks!
The studio´s amek 9098 has channel 1 with an ugly distortion at the output, both on DI and mic modes, channel 2 is OK. The pre works for a while then the sound is completely broken...but the metering seems OK on both channels, i mean, the metering doesn´t show signs of low signal or reduced dynamic range or headroom or something, it responds exactly as the channel 2 meter with the same signal applied....
The pre had this exact failure a year ago and was fixed by RME in the florida, but this time is quite expensive to send it again so any help would be GREATLY appreciated!
Any info on this pre such as topology and design details would be very useful too, thanks!