manulaudic
Well-known member
Hi everyone,
I would like to thank the forum for all the help you guys provided over the pasts months... i have found so many answers and been searching through the forum a lot
Now, I updated my T-bone SCT2000 (Nady TCM 1050) as Dave Thomas recommended.
It is the same circuit than the Apex 460. My original thread is here : http://www.groupdiy.com/index.php?topic=50285.0
Now i would like to order Tim's Capsule because i just love the sound of the original AKG tube. I have only recorded with The Tube and i loved it then ...
So here is my question : Which Circuit below suits the capsule?
I am not trying to get especially a C12 sound, but i want to make sure which circuit will take the best from the CT12:
- My Modded T-bone - Headbasket and shape of the mic is more like U47ish?
- Royer Circuit?
- Apex 460 into C12?
- How about a basic Fet microphone like the MXL 2001.
Also, what should i make sure to check before hooking up the capsule? B+ 120v? not more. any special voltages to check?
I hope you can answer my questions, and i know i can just experiment by putting the capsule here and there, but i want to double check first that the circuit will not damage the CT12...
Thank you guys one more time,
Manu
I would like to thank the forum for all the help you guys provided over the pasts months... i have found so many answers and been searching through the forum a lot
Now, I updated my T-bone SCT2000 (Nady TCM 1050) as Dave Thomas recommended.
It is the same circuit than the Apex 460. My original thread is here : http://www.groupdiy.com/index.php?topic=50285.0
Now i would like to order Tim's Capsule because i just love the sound of the original AKG tube. I have only recorded with The Tube and i loved it then ...
So here is my question : Which Circuit below suits the capsule?
I am not trying to get especially a C12 sound, but i want to make sure which circuit will take the best from the CT12:
- My Modded T-bone - Headbasket and shape of the mic is more like U47ish?
- Royer Circuit?
- Apex 460 into C12?
- How about a basic Fet microphone like the MXL 2001.
Also, what should i make sure to check before hooking up the capsule? B+ 120v? not more. any special voltages to check?
I hope you can answer my questions, and i know i can just experiment by putting the capsule here and there, but i want to double check first that the circuit will not damage the CT12...
Thank you guys one more time,
Manu