bruno2000
Well-known member
Works GREAT!
Running APS2, SWR 122M, SWR 122F and DCX 127
Thanks!
Best,
Bruno2000
Running APS2, SWR 122M, SWR 122F and DCX 127
Thanks!
Best,
Bruno2000
I use Aud1omans adapter and software w my ATS 1.5, followed the read me instructions for installation. It works fine on my windows 10 laptop. I found once I got my ATS 1.5 working w usb in WIN 10 I had to turn on the ATS unit, wait a beat or two, then plug in the USB or windows wouldn't recognize the hardware though. Not sure if that is something idiosyncratic w my system or that's normal.Has anyone had any luck loading the ATS 1.5 software on a Windows 10 machine? ATS 1.6 will, but Duke's adaptor won't work with that.
Ultimately, I'm trying to get a ATS-2 on line with a laptop loaded with Windows 10 and his adaptor.
If Windows 7 works, I might just get an old laptop for that...
Thanks for any insight,
Greg
I sent you an email yesterday. It might have gone to spam?Down load ATS2 Ver 1.5, install, change the APIO.dll to 178k one.
Email me with any questions. [email protected]
That's great!I use Aud1omans adapter and software w my ATS 1.5, followed the read me instructions for installation. It works fine on my windows 10 laptop. I found once I got my ATS 1.5 working w usb in WIN 10 I had to turn on the ATS unit, wait a beat or two, then plug in the USB or windows wouldn't recognize the hardware though. Not sure if that is something idiosyncratic w my system or that's normal.
Enter your email address to join: