- [BUILD] New FET/RACK Official Help Thread - Please read first post!
Set your trimmer so you have the highest DC you can get at TP18 (I get -1.603VDC), then test the DC resistance (Ω) across the S and D of Q1.
Test Point TP18 | Rev A |
EXPECTED | -1 VDC to -1.78 VDC |
MEASURED | -1.603VDC to -2.837VDC |
Hey @Echo North thank you so much for the personal attention Mike! Gotta hand it to you- The quality of everything from the build guide to the parts to the sound and packaging- Rockin'! So fun to build and now to use.Hi,
Make sure you start here...
https://help.hairballaudio.com/hc/en-us/articles/360049490733-FET-RACK-Operational-FAQ
Knobs:
All the modern clones (that I know) have the same issue. Back in the UREI days pots commonly rotated 320 degrees. That is not true anymore. 290-295 is more standard. You can set it how you like. Set to the max rotation to the beginning/end or line up the middle. It's up to you, I usually set max rotation to the high setting. For the smalls I set the attack to line up to 6 o'clock in the off pos. Withe the release you can do whatever.Again I generally set everything to the max...except the attack because of the off Switch.
Caps:
It's really subtle, nothing that is going to knock you socks off. If you like it stick with it.
IEC Hole,
That is super weird. Sorry about that! I've never seen that before.
Screws:
The are 6-32 and 1/4" long but can be longer. The head is undercut.
Mike
Enter your email address to join: