Nele
Well-known member
Hi all,
I have a problem with a Focusrite Voicemaster Pro I have in for repair. This is what has happened and caused it to break:
A tubemic with it's pwn psu was connected to the channel. Than somebody accidently switched on the phantom power and this caused the channel to break.
Now, when you connect any kind of mic (dynamic or condenser) it suddenly drops volume and sometimes emits loud cracks and pops. Line-input behaves ok.
I don't have a schematic and it's all SMD. Any suggestions? I already contacted Focusrite but their answer was to send the unit to them..
Thanks
I have a problem with a Focusrite Voicemaster Pro I have in for repair. This is what has happened and caused it to break:
A tubemic with it's pwn psu was connected to the channel. Than somebody accidently switched on the phantom power and this caused the channel to break.
Now, when you connect any kind of mic (dynamic or condenser) it suddenly drops volume and sometimes emits loud cracks and pops. Line-input behaves ok.
I don't have a schematic and it's all SMD. Any suggestions? I already contacted Focusrite but their answer was to send the unit to them..
Thanks