[email protected]
Member
- Joined
- Jun 7, 2020
- Messages
- 19
I want to replace all the weak points of the machine
[email protected] said:I want to replace all the weak points of the machine
+1Whoops said:Is the PSU a weak point in the KT-2A?
The main point here is that no significant improvement is to be expected from replacing the PSU.FarisElek said:But, building a linear PSU is getting to the point in which you should probably sell the Klark Teknik and spend the money you want to use for modifications to build a clone yourself with all the parts you most desire.
abbey road d enfer said:The main point here is that no significant improvement is to be expected from replacing the PSU.
Tosay, for a designer, using an smps instead of a linear is not a matter of cutting cost at the expense of any loss of performance, it's just the way to go, as long as certain precautions are taken.
In all honesty, I wouldn't be capable of designing an efficient smps, but good ones are commonly available and cheap.FarisElek said:Totally agree. I like Linear PSU's. But I don't think it's a flaw in this unit.
Ryan
dickiefunk said:I've just ordered some Harma tubes for my KT-2a. Still torn which optocell to get. I found another comparison of the Black Lion T4bla against the stock T4. Here is the link :-
https://drive.google.com/drive/folders/16_CwJ1MHZlQyyP4p5luIYNqrNVdOgg3p?usp=sharing
Which clip do you prefer?
Hi,
Do you recommend another brand of polypropylene capacitor?
I do not know that.There's a lot of different brands of good polypropylene capacitors like WIMA, Panasonic, Vishay.
But the question is, does changing film capacitors gives any improvement?
Enter your email address to join: