I've recently finished a system rack and one module of my 10 HP 3 RU system.
The module contains 2 mic pre amps based on the TLA Ian Thompson-Bell has designed.
The 10 HP design allows to stuff 16 pre amps into a 19" 3 U rack or, as seen in my first attempt, to put 8 pre amps plus PSU into a 19" "Baugruppenträger".
28 + 10 HP were used for the PSU, there is a remainder of 6 HP when stuffed with 4 modules HP. Non used space is currently filled with whatever I found...
Module:
Frequency response:
Noise floor:
The module contains 2 mic pre amps based on the TLA Ian Thompson-Bell has designed.
The 10 HP design allows to stuff 16 pre amps into a 19" 3 U rack or, as seen in my first attempt, to put 8 pre amps plus PSU into a 19" "Baugruppenträger".
28 + 10 HP were used for the PSU, there is a remainder of 6 HP when stuffed with 4 modules HP. Non used space is currently filled with whatever I found...
![modul%203.jpg](https://proxy.imagearchive.com/37b/37bc7082103dc1c3ea2e6112602db0e1.jpg)
Module:
![modul%202.jpg](https://proxy.imagearchive.com/a82/a8274966143398ac2eb59cced690939a.jpg)
Frequency response:
![modul%20fr.png](https://proxy.imagearchive.com/3e1/3e119f5c366528d18bfcd22e7408dd4c.png)
Noise floor:
![modul%20nf.png](https://proxy.imagearchive.com/e3a/e3ac5292c790fb39d7f02c3123ebd117.png)