Sammas
Well-known member
I took some time over the last month or so to re-rack 8 Neve 34128's. They worked fine before, but the job was rather half-arsed. Currently the rack is wired just for tracking/mixing through the preamps & EQs. The direct out signal is tapped prior to the pan pot on each module with a JLM reguritator kit balancing and buffering the output. A JLM AC/DC kit is providing the +/-15v rails and 48v.
I have added a JLM headphone amp with a separate set of XLR inputs. It really comes in handy when lumping stuff into obscure places to record. There is also a spare set of XLR cutouts on the back panel - the plan is to add a summing bus to it so that it also works as a mixer.
I have added a JLM headphone amp with a separate set of XLR inputs. It really comes in handy when lumping stuff into obscure places to record. There is also a spare set of XLR cutouts on the back panel - the plan is to add a summing bus to it so that it also works as a mixer.