buildafriend
Well-known member
abechap024 said:buildafriend said:What if I used http://angela.com/angelametalizedpolypropylenecapacitor18uf630vdc-2.aspx as my output coupling capacitor? ( 1.8uF instead of 2.2uF )
The smaller the cap you put in, the higher the lowest frequency AC signal it can pass. Depending on the circuit it may or may not start audibly rolling off the lows, or phase shifting low frequency content. I would stick with at least 2.2uf.
Yeah forget that, I'm hoping this thing sounds good on drums.