S stefan Well-known member Joined Dec 5, 2004 Messages 121 Location Sweden Jan 10, 2005 #1 A friend of mine owns a vintage Neumann M49 but he has never been able to use it cause he has no PSU. Could the G7 PSU be modified to fit this mic?
A friend of mine owns a vintage Neumann M49 but he has never been able to use it cause he has no PSU. Could the G7 PSU be modified to fit this mic?
gyraf Well-known member Staff member GDIY Supporter Moderator Joined Jun 4, 2004 Messages 11,894 Location Aarhus, Denmark Jan 10, 2005 #2 yes. but make sure that you get the right voltages - too high voltages will hurt the mic.
mich Well-known member Joined Oct 31, 2004 Messages 449 Location Israel Apr 18, 2009 #3 What is pin 8 used for ? Here is the Schematic : http://members.tripod.com/~coreyeng/m49sch.PDF
gyraf Well-known member Staff member GDIY Supporter Moderator Joined Jun 4, 2004 Messages 11,894 Location Aarhus, Denmark Apr 20, 2009 #4 It's a calibration input pin. You don't need to connect it. Jakob E.
B buschfsu Well-known member Joined Dec 31, 2004 Messages 760 Location jacksonville FL Apr 20, 2009 #5 does that use the M7 capsule? if so its 120 volts divided to 60v versus 160 to 80 as in the G7 correct?
does that use the M7 capsule? if so its 120 volts divided to 60v versus 160 to 80 as in the G7 correct?
mich Well-known member Joined Oct 31, 2004 Messages 449 Location Israel Apr 20, 2009 #6 Thanks for the reply, it is a M49b modified to c so it had me confused cause i didnt have the c version schematic. the capsule in my case is not M7 but a KK49 - still 60/120V.
Thanks for the reply, it is a M49b modified to c so it had me confused cause i didnt have the c version schematic. the capsule in my case is not M7 but a KK49 - still 60/120V.