andre tchmil
Well-known member
onlymeeee said:kepeb said:really?
so the bottom two (spaced away) pins are the magnet coil in the relay yea?
and the switching switches the two 'common' connections to the opposite adjacent pins... i dont see what this is doing on the board.
i've not used relays before, only transistors so this is helpful.
some people just never stop posting dumbass questions do they!![]()
Hi Kebeb, it's just come to my attention that I drew the link as looking from above the top PCB, not the bottom like the jpg suggests. So to stop confusion, I'm just saying link both sides now.
eg.![]()
Did you clock this?
Does this mean we can bypass the delay circuit if the pre operates at +24v ?
What else needs to be done ?