Thank you Midnight Arakis. I have checked the gerber file, but I have not found any silk screen or drilling files located at -1430, -1430[Any suggestions are welcome!] -- HEY!!! >> I WOULD NOT SEND YOUR GERBER FILES OUT FOR FABRICATION JUST YET, AS THERE ARE SOME MAJOR ISSUES WITHIN THEM!!! << >> I AM NOT KIDDING!!!
I have downloaded your -- Gerber_PCB1_2024-4-15.zip -- file and took a quick look at what you have. What I found was not only is your entire PCB layout -- upside-down -- in relation to what is being shown as your 0/0 Datum, but there are also bits of silkscreen and a bunch of drill-hits located at -- X = -1430mm / Y = -1430mm from your 0/0 point!!! Once your PCB-fabricator sees these anomalies, they will certainly be contacting you to let you know that your PCB -- CANNOT -- be fabricated!!! For us Americans, what I am saying is.....you have silkscreen and drill-hits that are over >> 4-FEET AWAY FROM THE "0/0" DATUM OF YOUR PCB <<!!! I wouldn't do it!!!
Right now, it is after 9:00 AM in the morning and I have literally been awake all night!!! My going to bed right now means that I probably won't be getting up until sometime around mid-afternoon here. In any case, just as soon as I am able to, I will take a closer look at your GERBER and N/C Drill files and provide you with some screen-shots that will show you exactly how your GERBER and N/C Drill data are all messed up!!! From there, you can do whatever you need to, to correct the problems that I can see.
HANG ON!!! OK???
/
As you can see, some silk screens exceed the frame layer, but that is only for identification purposes. In multiple projects I have collaborated with my PCB manufacturer, these silk screens beyond the frame layer will not be manufactured, and I believe this is a consensus.
I certainly respect everything you know in commercial manufacturing, but it should be emphasized that this is a non professional project and I am not a professional designer. All I have done is to make this project operational. Forcing myself to follow the standards will cause me to lose interest in this project and abandon it