For those of you familiar with PCB manufacturing and the available options, I was looking to duplicate the finish of these Blue boards but wouldn't know where to start.
From the pictures, it's a standard one layer board with the copper layer and solder mask on the bottom. But the mask seems to be transparent; anybody know how that's achieved?
The colour also isn't that regular sharp glossy green. Matte green?
Here's the front:
From the pictures, it's a standard one layer board with the copper layer and solder mask on the bottom. But the mask seems to be transparent; anybody know how that's achieved?
The colour also isn't that regular sharp glossy green. Matte green?
Here's the front: