dharma one
Active member
Hey guys,
I've got an 80's German made Nobels SST-19 rackmount guitar preamp/multifx, but unfortunately without PSU, and the power requirements are a bit unusual. It've got another fx box from the same manufacturer and it sounds great, so would like to put this rackmount unit to use again too!
The manufacturer's page says:
AC: 2 x 6,6 Volt 1A. (XLR Plug: Pin 1 (Middlecontact) = GND, 2 and 3 is AC. Please note: AC NOT DC!
http://www.nobels.com/schematics/nobels_sst19_sm.pdf
Anyone know if I can buy a PSU replacement ready made (can solder the XLR) - or alternatively is it difficult to build? I'm guessing I'd need some housing, a transformer and a fuse, but have no idea what to search for. I'm in the UK so a link to a suitable part in a UK/European electronics shop would be awesome!
Many thanks
I've got an 80's German made Nobels SST-19 rackmount guitar preamp/multifx, but unfortunately without PSU, and the power requirements are a bit unusual. It've got another fx box from the same manufacturer and it sounds great, so would like to put this rackmount unit to use again too!
The manufacturer's page says:
AC: 2 x 6,6 Volt 1A. (XLR Plug: Pin 1 (Middlecontact) = GND, 2 and 3 is AC. Please note: AC NOT DC!
http://www.nobels.com/schematics/nobels_sst19_sm.pdf
Anyone know if I can buy a PSU replacement ready made (can solder the XLR) - or alternatively is it difficult to build? I'm guessing I'd need some housing, a transformer and a fuse, but have no idea what to search for. I'm in the UK so a link to a suitable part in a UK/European electronics shop would be awesome!
Many thanks