buildafriend
Well-known member
![E14F0783-64C7-4408-A7EC-F142DBE2998C-876-0000015D77CD385C.jpg](https://proxy.imagearchive.com/c28/c2875c921f4a01a8dac5584219550e92.jpg)
Alright, I fixed a few funky traces from my layout, etched it, built it etc.. I seem to be getting all the right voltages. Everything looks good except for my output. My output was a acting a little strange and I think it was my output transformer selection that caused it.
I used a 0.1uF 250v WIMA film cap in place of C2 as a temporary part while I wait for the 0.47uF.
Since I still don't have my UTC A-25, would an edcor 2-1/2W 10K Ohms to 600 Ohms (4.1:1) line level matching transformer work?
I only ask because I have one available that I thought I might try to get this thing running.
URL is below.
http://www.edcorusa.com/p/160/xsm10k-600