bradb
Well-known member
Hey everyone,
I'm recapping a Gates Sta-Level and I'm rounding up some parts now. Any preferences or advice on what to get?
I'm going with Sprague Orange Drops (400V) for the 0.02uF to 1uF caps. The question is on caps C7a, C7b and C7c... 15uF, 15uF and 10uF respectively. the values are too large for a reasonable poly cap, any preferences on an electrolytic or tantulum? what should I go for?
Also the PSU/pi network caps are 20uF... should I increase these values?
Thank you!
I'm recapping a Gates Sta-Level and I'm rounding up some parts now. Any preferences or advice on what to get?
I'm going with Sprague Orange Drops (400V) for the 0.02uF to 1uF caps. The question is on caps C7a, C7b and C7c... 15uF, 15uF and 10uF respectively. the values are too large for a reasonable poly cap, any preferences on an electrolytic or tantulum? what should I go for?
Also the PSU/pi network caps are 20uF... should I increase these values?
Thank you!