telehumbucker
Well-known member
I have a Lynx Aurora converter and am using their LT-Adat card. One of the optical jacks is not working. The card was made in the early 2000's, around 2002 I believe. Their tech support couldn't give my info on the make, specs, etc... of the optical jack....Was just told they were probably the same as were used in Alesis units at that time. I looked for logos info on the jacks and there wasn't much, just what looks like an "s" like logo. Looking at available optical jacks that seem at least visually, the same....there appear to be 3 or so variations, which have the ground, vcc, and vout on different pins.
Anyone know which variant would be the right one for the Lynx LT-Adat card, which according to tech support, would likely be the same as what Alesis used in the early 2000's? The English company Cliff supplies one variant (ORJ-8) and they come up in searches for optical jacks....another variant is the DLT1150, which is readily available from Chinese suppliers, and the third is from Solteam opto, model JSR1B15, they all have differnt pin grounds, vcc and vout locations.
Anyone have any idea which variant would work in the LT-Adat card?
Anyone know which variant would be the right one for the Lynx LT-Adat card, which according to tech support, would likely be the same as what Alesis used in the early 2000's? The English company Cliff supplies one variant (ORJ-8) and they come up in searches for optical jacks....another variant is the DLT1150, which is readily available from Chinese suppliers, and the third is from Solteam opto, model JSR1B15, they all have differnt pin grounds, vcc and vout locations.
Anyone have any idea which variant would work in the LT-Adat card?