spottydog10
Member
I used to run a small studio in the local school but left a couple of years ago.
The school kindly gave me some stuff recently as the studio was being closed down, including an SE Z5600 ii a.
When testing it, it appears to have lost a bit of bottom end and some low mids so I changed the valve to a 6072A/12AY7-ELECTRO HARMONIX
as the easiest option to try and resolve this but this made no difference.
Any thoughts on what to try next? I would have had a look at the capsule to check if there was any dirt on it but I cant see an an obvious way of
getting to it.
Any advice gratefully received.
Cheers
The school kindly gave me some stuff recently as the studio was being closed down, including an SE Z5600 ii a.
When testing it, it appears to have lost a bit of bottom end and some low mids so I changed the valve to a 6072A/12AY7-ELECTRO HARMONIX
as the easiest option to try and resolve this but this made no difference.
Any thoughts on what to try next? I would have had a look at the capsule to check if there was any dirt on it but I cant see an an obvious way of
getting to it.
Any advice gratefully received.
Cheers