dryman
Active member
Hello,
i racked up an old NTP peakmeter, but i can't use in on my main out of my interface, because it is regulated by remote-control.
Because i integrated a bunch of Outboard, i am low on alalog-outputs. i don't want to spend two for the meter. Now i decided to use my SPDIF out, because i don't use it very often. Is there any cheap D/A-Converter-Chip to do it?
i found this one, which fit my needs, but i think there could be a cheaper solution:
http://www.reichelt.de/A-V-Kabel-Toslink-LWL-/WANDLER-D-A/3//index.html?ACTION=3&GROUPID=3614&ARTICLE=115282&SHOW=1&START=0&OFFSET=16&&SID=33T7SnVX8AAAIAAG7o5Ak978e8b58c9298c43c182c1158be75094&LANGUAGE=EN
i racked up an old NTP peakmeter, but i can't use in on my main out of my interface, because it is regulated by remote-control.
Because i integrated a bunch of Outboard, i am low on alalog-outputs. i don't want to spend two for the meter. Now i decided to use my SPDIF out, because i don't use it very often. Is there any cheap D/A-Converter-Chip to do it?
i found this one, which fit my needs, but i think there could be a cheaper solution:
http://www.reichelt.de/A-V-Kabel-Toslink-LWL-/WANDLER-D-A/3//index.html?ACTION=3&GROUPID=3614&ARTICLE=115282&SHOW=1&START=0&OFFSET=16&&SID=33T7SnVX8AAAIAAG7o5Ak978e8b58c9298c43c182c1158be75094&LANGUAGE=EN