STA LEVEL PCB FEELER [CLOSED]

[zayance]

Basically a copy paste of the original schematic, but with some more readily available things, and
driven with a solidstate PSU.

More infos:

http://groupdiy.com/index.php?topic=59017.0


Price: 85EUROS INCL. ALL
preliminary price was at 60euros excl.all

A panel includes:
- mono main pcb
- main psu + bias psu
- recovery and mode pcbs
- two gates logos for frontpanel (IF you want to make it "genuine" look alike)
- resistor bending tool
- discharging tool
- two separate regulator pcbs
- relay bypass pcb
- transformer primary selecting pcb (115V/230V)

Best,


T.

----------------------------------------------------------------------------------------------------------------------------------------------------------


FEELER LIST:

Bassniac    1
Jeremy Starseed  2
ilfungo 1
Songguy 1?
Ericbazaar  2
nickhepfer  2
Kosi  1
mrcase 1?
Jim50hertz  1
gareth33 1
kvintus  1
bomper 1
brewbacca 1
jackies  2
pachi2007  1
punk  1
braeden 1
useme2305  1
iomegaman 1
Floti  1
Albrebreton 1
djfatum  1
Marcin 1
mrscary  1
fazer  1
zamproject  1

 

[anjing]

I'd be interested.

Regards,

Pierre

 

[Krcwell]

I'm intersted.

 

[dmp]

Very cool!
I'd be interested.

 

[iprovlek]

Great!
Im for one!

 

[rob_gould]

Likely in for one but I'd like to see a BOM too.

 

[bernbrue]

Hi,
download the gates sta manual, please.  You will find a BOM and the schematic there as well. The only differences are the added recovery time constants (6), the triple mode and the 6AQ5 (EL90) tubes as direct replacements of the 6V6. The pcb has the T-bar adapter for the 6386 already included. So you can either use the 6386 tube or two triode wired 6BA6 (EF93).  The rest is according to the original schematic. You will like it.
Bernd

 

[Winetree]

I'm in for 2

 

[kambo]

2  please  8)

 

[Purup]

Interested.
What do you sugest as input/output transformers for the build?

 

[bernbrue]

Well, we want to try the Hammond 1650G as output tx. The Edcor 8K/600 might be good as well.  For input there are a few candidates which might do without or slightly modified input pad. Of course you can use the Sowter direct replacement transformers. 
Bernd

 

[Meyer]

cool, I'm interested! 

 

[craig]

Im  in for a board

 

[zayance]

Hi There,


Sorry for late reply, 1st Post updated with files.

For the Feeler list, i've made all people interest as for one panel if not precised.
Feeler is open until beginning of next week.
Then i'll contact people by PM for payment adress etc...

We thank you for your interest.

Keep in touch

T.

 

[rob_gould]

This is looking good! 

Please convert my "1" to a 1 Zayance!

 

[SKJGProject]

in for one!

 

[insideout]

one for me

 

[shabtek]

i like the 'extras'

 

[Pip]

I'm in for 2 please.

Pip

 

[Dr_J]

Yo,

cool! I've followed the first steps on the German forum... and now we've got a pcb 

I'm in for one (maybe i'll update for 2 - i'll have to think about it...)

ROCK-ON!