spyder_hobo
Member
I've done a healthy amount of research on the metas and online for this specific project but so far havn't found exactly what I'm looking for so I thought I'd see if anyone here had any advice.
I picked up a yamaha pm1000 recently with the intention of turning it into an 8x2 mixing console. I'm really happy with the way it sounds but I have a feeling the Buss channels could be improved or replaced. I havn't had any luck finding a summing amp kit anywhere so I'm planning on building it from scratch and was wondering if any one here has any experience with this type of project?
Would something like this do the trick?
http://forsselltech.com/downloads/schematics/Summing%20Buss2.pdf
I have a 44 and 48v rail to work with so I'll need to figure that one out too since I think the 992/3's run on 12-24v.
Thanks!
I picked up a yamaha pm1000 recently with the intention of turning it into an 8x2 mixing console. I'm really happy with the way it sounds but I have a feeling the Buss channels could be improved or replaced. I havn't had any luck finding a summing amp kit anywhere so I'm planning on building it from scratch and was wondering if any one here has any experience with this type of project?
Would something like this do the trick?
http://forsselltech.com/downloads/schematics/Summing%20Buss2.pdf
I have a 44 and 48v rail to work with so I'll need to figure that one out too since I think the 992/3's run on 12-24v.
Thanks!