Toft ATB power supply connectors

[NOON]

Does anyone know what the connectors are called that Toft used for their ATB mixer power supply cable?
I have two people who have the mixer and psu but no cables and it seems spares are not readily available at a reasonable price, at least here in Australia.
I can go trawling through the connector section of Mouser etc but I'm hoping someone can save me some time by at least narrowing down the brand and series.

 

[Rob Flinn]

Have you tried asking Toft Audio Designs ? They must have a support department.

 

[NOON]

They've offered to make one up for $180usd + shipping to Australia. Still trying to get an answer from them on the connector.

 

[NOON]

Does anyone at least recognise that Z with wings logo?

 

[Brian Roth]

Does anyone at least recognise that Z with wings logo?

I was also wondering about that. There is an ATB here locally. Next time I'm there (whenever that is...lol) I'll look at the cable.

Bri

PS....how many people here caught the "secret meaning" of the ATB moniker?

 

[rock soderstrom]

They've offered to make one up for $180usd + shipping to Australia. Still trying to get an answer from them on the connector.

For a fraction of that money, you can have a few of these connectors sent to you. They also have 5pin versions there, if they don't fit directly, replace the existing sockets with these or similar.

https://www.voelkner.de/products/68...m=CPC&utm_campaign=D733422&utm_content=intern

Does anyone at least recognise that Z with wings logo?

My AI search didn't turn up anything, perhaps from the aviation industry?

Also interesting:

https://www.pollin.de/p/rundsteckve...f7Yk5vakk0E1ye_12huoYNBRljmxUnykaAs9gEALw_wcB

 

[ohrange]

Looks like a GX Connector, they come with various pin counts and diameters 12, 16, 20..., the number refers to the metric thread.

 

[NOON]

Thanks everyone. I'm familiar with the connectors linked above in their smaller sizes, they're commonly sold here as aviation microphone connectors. GX20 or 25 looks very similar but they don't have the additional keying notches.

If I don't come up with an exact match I should be able to replace the panel mount connectors with GX. Just making a cable with the proper connectors will be much easier though, can do that in the workshop instead of having to take tools to the desks.

 

[Walrus]

Is it a Hirose connector like this…..
https://www.hirose.com/en/product/d...menttype=Catalog&lang=en&documentid=D49414_en

 

[NOON]

Reply from PMI. "One end is the Zhancent Industrial Aviation Plug: P16F-5A. The other end is 19M-6A, but I’m not sure of the brand."
Haven't had time to research them yet, but here for future reference.

 

[Newmarket]

Reply from PMI. "One end is the Zhancent Industrial Aviation Plug: P16F-5A. The other end is 19M-6A, but I’m not sure of the brand."
Haven't had time to research them yet, but here for future reference.

I noted that one end was "6" and the other "5".

6 way socket listed here:

https://sinocontec.com/product/19M_female_plug

 

[Tubetec]

Yep , thats whats known as an aviation plug on the back of the mixer , they can be found on ebay quite cheaply , but there is two sizes , normal and miniature with the various pinout arrangements .

Whats on the back of the power supply looks similar but with a specific key, I havent seen that kind on anything before .

thats it there ,
https://www.ebay.ie/itm/123982113162