sam system-d
Well-known member
Hi folks,
So after trying it live, I've decided to give it a shot. After searching for the schematic for like 2 oe 3 weeks, I've found this site :
http://www.jhaible.de/transient/jh_tran_gate.html
So you can breadboard it... Great!
But I like pcbs...
So I've decided to design my own.
First try : 2 boards of 160mm x 100mm above one of the other.
And I've finally decided to do it on double sided board (74mm X 204mm - so 4 of those can fit a 300x210 board...)
First try is not really good, even if I'm good at etching single sided boards. I think I've been too fast on this, so I'll have to redo it. The 2 etchings are not really on top of each other, so it's unusable... Do you have any advice on how to do this? I'll be glad to ear...
Anyway, I'll keep you informed about this particular project. I've decided to add Balanced and unbalanced in/outputs, so I can use it live or in the studio.
I won't post etching files here, as this unit is still on production, but shoot me an email if you need it. I'll send it as soon as I'm shure it's working (probably in january 2013) Please, keep this as a educational/hobby project, don't sell it.
So after trying it live, I've decided to give it a shot. After searching for the schematic for like 2 oe 3 weeks, I've found this site :
http://www.jhaible.de/transient/jh_tran_gate.html
So you can breadboard it... Great!
But I like pcbs...
So I've decided to design my own.
First try : 2 boards of 160mm x 100mm above one of the other.
And I've finally decided to do it on double sided board (74mm X 204mm - so 4 of those can fit a 300x210 board...)
First try is not really good, even if I'm good at etching single sided boards. I think I've been too fast on this, so I'll have to redo it. The 2 etchings are not really on top of each other, so it's unusable... Do you have any advice on how to do this? I'll be glad to ear...
Anyway, I'll keep you informed about this particular project. I've decided to add Balanced and unbalanced in/outputs, so I can use it live or in the studio.
I won't post etching files here, as this unit is still on production, but shoot me an email if you need it. I'll send it as soon as I'm shure it's working (probably in january 2013) Please, keep this as a educational/hobby project, don't sell it.