Mic Pre Kits PCB's Etc Whats Available?
« on: September 27, 2004, 07:25:27 AM »
I know there's a few US companies that make Mic Pre kits and boards, the only one i can seem to find much info on is Seventh Circle. So who else makes mic pre kits either valve or solid state?
 I know in the non commercial sector the Green Pre is the starting point and the valve G9 seems to have been well covered, is there any other pre's people have built up and what pcb's are available?
Any ideas greatly appreciated.
Vikki(uk) :grin:


Mic Pre Kits PCB's Etc Whats Available?
« Reply #1 on: September 27, 2004, 07:36:00 AM »
Aussie firm JLM Audio (I do believe he is also a member of this forum)
http://www.jlmaudio.com/kits.htm

http://www.paia.com

Category 5

Mic Pre Kits PCB's Etc Whats Available?
« Reply #2 on: September 27, 2004, 07:36:37 AM »
try hamptone....  www.hamptone.com

Shane

Mic Pre Kits PCB's Etc Whats Available?
« Reply #3 on: September 27, 2004, 09:27:27 AM »
Here's one i found for a valve pre amp, would that have enough gain for most applications?
http://www.kandkaudio.com/proaudio.html
Vikki(uk) :cool:

Greg

Mic Pre Kits PCB's Etc Whats Available?
« Reply #4 on: September 27, 2004, 10:21:47 AM »
Bauman has API boards with many options !
Greg Stein
New Orleans, LA

Mic Pre Kits PCB's Etc Whats Available?
« Reply #5 on: September 27, 2004, 10:45:32 AM »
API Boards look interesting!
Vikki(uk) :grin:

Greg

Mic Pre Kits PCB's Etc Whats Available?
« Reply #6 on: September 27, 2004, 10:50:06 AM »
http://www.groupdiy.com/index.php?topic=981

You might have seen this already, but here's the link to Bauman's original post. I think he has a new order going out in a couple days. I'm going to get a pair of these. Should be a nice build.
Greg Stein
New Orleans, LA

Mic Pre Kits PCB's Etc Whats Available?
« Reply #7 on: September 27, 2004, 11:17:27 AM »
I think i'll go for a couple myself, is there a schematic about anywhere?
Vikki(uk) :grin:

Greg

Mic Pre Kits PCB's Etc Whats Available?
« Reply #8 on: September 27, 2004, 11:37:04 AM »
I'm assuming it's based on http://www.danalexanderaudio.com/api.html (scroll down and there's an API 312 schematic), with a few options for trannies, DIPs or discrete opamps, relays for switching, etc.

But I haven't seen a schematic or an actual parts list for his design. I'm hoping that he'll send some documentation with it. I'm also excited about getting the opamp boards.
Greg Stein
New Orleans, LA

Bauman

Mic Pre Kits PCB's Etc Whats Available?
« Reply #9 on: September 27, 2004, 11:40:41 AM »
Hi,

You can get the R312 files here:

http://www.thediypill.phx.com.br/forumfiles/

Hang on while I upload the new files, which are REV3 instead of REV2.
I´ll up the schematic, partlist and the ready-to-transfer layout for those that enjoy home etching... :) Check back later.

cheers!
Fabio
cheers!
Fabio
_____________________
www.thediypill.com/store


 

Related Topics

  Subject / Started by Replies Last post
85 Replies
35460 Views
Last post August 31, 2014, 04:22:25 AM
by Majestic12
25 Replies
4767 Views
Last post June 20, 2011, 09:35:44 PM
by mikefatom
160 Replies
48987 Views
Last post March 02, 2019, 12:49:03 PM
by Catrunes
133 Replies
44070 Views
Last post August 01, 2018, 08:06:28 PM
by jandoste