jsteiger

Re: CAPI-Gear; 500 Series Modules and DIY Parts Galore!!!
« Reply #920 on: January 13, 2019, 01:27:45 PM »
500 rack kit out of stock for long?
The missing rear panels should be heading to screen printing this coming week. I'll hopefully have everything back here in 2-3 weeks max.
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.


jsteiger

Re: CAPI-Gear; 500 Series Modules and DIY Parts Galore!!!
« Reply #921 on: February 17, 2019, 11:40:23 AM »
The CAPI 511 rack kits are back in stock!

http://capi-gear.com/catalog/index.php?cPath=87_89_182
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.

Re: CAPI-Gear; 500 Series Modules and DIY Parts Galore!!!
« Reply #922 on: February 18, 2019, 03:24:53 AM »
I see your stock of 1k stereo faders is getting low. Will you restock? Might need a few of these in the future and cant seem to find another source.

Thanks and all the best,

Magnus

jsteiger

Re: CAPI-Gear; 500 Series Modules and DIY Parts Galore!!!
« Reply #923 on: February 18, 2019, 09:34:51 AM »
I see your stock of 1k stereo faders is getting low. Will you restock? Might need a few of these in the future and cant seem to find another source.

Thanks and all the best,

Magnus
I likely won't restock them.
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.

Re: CAPI-Gear; 500 Series Modules and DIY Parts Galore!!!
« Reply #924 on: March 16, 2019, 08:56:34 AM »
Hey Jeff,

I know you don`t sell your knobs separately, but how about the colored stickers/inserts? I need a bunch for my API knobs, and I have a few I bought from you years ago that have this really nice stiff plastic that I haven`t found elsewhere. 3M I believe.

jsteiger

Re: CAPI-Gear; 500 Series Modules and DIY Parts Galore!!!
« Reply #925 on: April 16, 2019, 09:34:22 PM »
I just posted some special info for orders placed over the next week. Please see the red banner on all web pages for the details.
www.capi-gear.com

Cheers!! Jeff
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.

jsteiger

Re: CAPI-Gear; New 500 Headphone Amp Kit and DIY Parts Galore!!!
« Reply #926 on: July 27, 2019, 01:16:09 PM »
Hey everyone

I have just released the HPA500 Headphone Amplifier kit.

The official support thread is here:
https://groupdiy.com/index.php?topic=72986.0

Kits and info at the store can be found here:
https://capi-gear.com/catalog/product_info.php?cPath=22_117_225&products_id=614

Oh, and it has a most giant knob!


Cheers! Jeff
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.

Fuzz Face

Re: CAPI-Gear; New 500 Headphone Amp Kit and DIY Parts Galore!!!
« Reply #927 on: July 30, 2019, 08:31:51 PM »
Jeff the headphone amp looks great!

I saw your new DI box and DI transformer on Instagram. Any chance you could share any details or when those might be available for sale? I gotta have em!

gar381

INTRODUCING the garxxxx(OA10) DOA
« Reply #928 on: August 08, 2019, 09:02:51 PM »


Introducing the garxxxx(OA10)

These started out as an experiment here at the shop,
Hence the original garxxxx moniker.  These turned into
My version of an OA10, an old early 70s German DOA.

The original OA10 was a 9 pin rectangular box with 2
Different versions of output transistors and were externally
Freq. Comped.  This DOA was designed to be operated
up to +/- 22v.  My German OA10 expert buddy told me that the
Originals were not very particular as to what transistors and
Diodes they used.

My version is a standard 2520 pin out with internal freq. comp.
Built in.  It uses all modern parts and will run fine at +/- 15v thru
The 51x standard of +/-24v.  (All of my protos were burned in for
3 weeks at +/-28v and still ran cool)
PSU decoupling is also on board like all my gar DOAs.  These
Will drive 2503 style of transformers with ease.

To my ears, the garxxxx is not as open/flat/clean as the gar918 top
to bottom but is still very nice and smooth in a very good way. I love
the warmth and presence of the lower mids without them being at all muddy. 
Much warmer than all my other gar DOAs.

My Guitar beta tester loves the garxxxx in an API
style pre for guitars.  My other beta tester loves this guy for
vocals, bass and a general all around for mic pre duties.

To Jeff’s ears… 
“Yes the low end warmth is what got us about it too. So thick and hefty
without being pillowy or flabby. I think it will rule for kick and bass.
We also like the smooth top end.”

I will be interested to hear what others think about other
Uses summing, EQs, Line amps etc.  Feel free to post
Your thoughts in the garxxxx(OA10) support thread
At GroupDIY.
 
These will soon be available at the CAPI store in both kits and
un-stuffed pcbs.

Best,

Gary

RETIRED.....  from 51yrs in Show Biz

gar2520, gar1731,garAM10,gar918 DOAs at  http://capi-gear.com/catalog/index.php?cPath=71_72
NEW Sphere section  http://gar381interests.com/gar381interests.html

jsteiger

Re: CAPI-Gear; New 500 Headphone Amp Kit and DIY Parts Galore!!!
« Reply #929 on: August 09, 2019, 12:40:49 PM »
Hey folks

Summer vaca is over and the store is open for biz! Bring it on...we are ready  ;)

Cheers, Jeff
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.


jsteiger

Re: CAPI-Gear; New 500 Headphone Amp Kit and DIY Parts Galore!!!
« Reply #930 on: August 18, 2019, 01:49:46 PM »
Happy to announce I've got Gary's new garOA10's listed at the store!

You can find them here:
https://capi-gear.com/catalog/index.php?cPath=71_72
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.

jsteiger

Re: CAPI-Gear; New 500 Headphone Amp Kit and DIY Parts Galore!!!
« Reply #931 on: August 18, 2019, 01:55:08 PM »
I've also just released a new transformer DI and inclusive kit! Based on the classic UTC A-11.



Full kits are here:
https://capi-gear.com/catalog/product_info.php?cPath=231&products_id=623

Transformers only are here:
https://capi-gear.com/catalog/product_info.php?cPath=21_104&products_id=618

Happy Sunday!  8)
Jeff
Visit the CAPI store at http://www.capi-gear.com

CAPI is not affiliated with, endorsed by, or sponsored by API.