Was thinking of connecting my mic capsules to my DIY mics using little component sockets like transistor sockets that come as gold plated or Dil sockets is it ? like IC sockets can cut them into singles.
Is this a bad idea ?
Would there be issue with having in my case the two connections on say one transistor socket ?...Could chop socket up have one plug one socket per wire
I dont no too much about mics....I take it we need thin short as possible wire from mic circuit to capsule , is that right ?
Some of the lollypop heads have a long way to travel to mic guts tho
I read some stuff about stray capacitance messing up high frequencies.
Thanks for reading
Is this a bad idea ?
Would there be issue with having in my case the two connections on say one transistor socket ?...Could chop socket up have one plug one socket per wire
I dont no too much about mics....I take it we need thin short as possible wire from mic circuit to capsule , is that right ?
Some of the lollypop heads have a long way to travel to mic guts tho
I read some stuff about stray capacitance messing up high frequencies.
Thanks for reading