Hi, I'm finishing up a solid state pultec from the drawing about 9 posts down at this link with API makeup
http://www.groupdiy.com/index.php?topic=16390
My question is in place of the HS-56V on the output, I have a bunch of output transformers Sowter 8403, Cinemag CMOB-1, and the Lunda from the Gyraf pultec. Would these work fine and would the zobel network (1.8K resister in the drawing) be the same with other 1:1 600 output transformers. I don't have a scope to measure. Would I be more safe going with a Sowter 3603 replica of the HS-56V.
Thanks
http://www.groupdiy.com/index.php?topic=16390
My question is in place of the HS-56V on the output, I have a bunch of output transformers Sowter 8403, Cinemag CMOB-1, and the Lunda from the Gyraf pultec. Would these work fine and would the zobel network (1.8K resister in the drawing) be the same with other 1:1 600 output transformers. I don't have a scope to measure. Would I be more safe going with a Sowter 3603 replica of the HS-56V.
Thanks