Neve BA211 - Presence Question

dukasound · Dec 13, 2004

Hi
These days I tried to learn about circuit of Neve presence control.
I found some difference between connection on Neve schematic
wher after OFF position follow J,M,H,S,Vand T (no U position)

and schematic BA211 circuit where after OFF follow U,T,V,S,H,M and J.

Does anyone can answer on this question.
Thanks
Duka

Tekay · Dec 14, 2004

When BA211 was used in the 1078 a 10kHz position was added in the mid section, connected to the "U" pin.

dukasound · Dec 14, 2004

[quote author="Tekay"]When BA211 was used in the 1078 a 10kHz position was added in the mid section, connected to the "U" pin.[/quote]
I know you will answer.
OK. What with OFF position?
Thanks
Duka

Tekay · Dec 14, 2004

The resistors are not drawn on one of the schematics, they're only bleed resistors to prevent clicks. You can use 4M7, 6M8 or anything up to 10M.

dukasound · Dec 14, 2004

[quote author="Tekay"]The resistors are not drawn on one of the schematics, they're only bleed resistors to prevent clicks. You can use 4M7, 6M8 or anything up to 10M.[/quote]
Hi Thomas
I know that. Also you sent me 4M7 for my H.P.filter.
I am talking about difference not only U position.
On Neve schematic after OFF position follow J,M,H,S,V and T
on BA211 circuit after OFF follow U,T,V,S,H,M and J.

Tekay · Dec 14, 2004

OK! I see that, they just put the off position in the other end of the frequencies

dukasound · Dec 14, 2004

[quote author="Tekay"]OK! I see that, they just put the off position in the other end of the frequencies[/quote]
Thanks!
Duka

Anyone have a pics of original B211 pcb?
Also I would like to see some pics with wiring all pcbs in 1073.
Thanks in advance

Neve BA211 - Presence Question

Help Support GroupDIY Audio Forum:

dukasound

Well-known member

Tekay

Well-known member

dukasound

Well-known member

Tekay

Well-known member

dukasound

Well-known member

Tekay

Well-known member

dukasound

Well-known member

Similar threads

Latest posts

Neve BA211 - Presence Question

Help Support GroupDIY Audio Forum:

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!