chipmanv
Member
This is my first post. I've been a silent observer all along. Thank you all for your ideas and inspiration. This is a great forum.
I racked these Lomo mic pre modules that were parted from a Soviet console.
chassis: par-metal
front panel punching/engraving: front panel express (par-metal material)
PCB's; mic input relay board and filament supply: PCB 123
H.T. and 48V supplies: off the shelf International Power
cool switches with LED in tip: NKK
meters: Sifam
shelves for modules and steel supply shield: local metal shop
output & DI trannies: Cinemag
Knobs: EHC
if images don't load go here:
http://home.hvc.rr.com/maxwellv/
I racked these Lomo mic pre modules that were parted from a Soviet console.
chassis: par-metal
front panel punching/engraving: front panel express (par-metal material)
PCB's; mic input relay board and filament supply: PCB 123
H.T. and 48V supplies: off the shelf International Power
cool switches with LED in tip: NKK
meters: Sifam
shelves for modules and steel supply shield: local metal shop
output & DI trannies: Cinemag
Knobs: EHC
if images don't load go here:
http://home.hvc.rr.com/maxwellv/