ruairioflaherty
Well-known member
Does anyone have one of these laying around? THAT are all out.
Cheers,
Ruairi
Cheers,
Ruairi
-
If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
WTB - THAT 4301 demo board
- Thread starter ruairioflaherty
- Start date
Help Support GroupDIY Audio Forum:
ruairioflaherty
Well-known member
I know someone has one gathering dust in a drawer.....
shot
Well-known member
Not exactly THAT's original demo board, but maybe you should check Ungifted's web:
http://diy-tubes.com/that4301-compressor-pcb.html
http://diy-tubes.com/that4301-compressor-pcb.html
ruairioflaherty
Well-known member
Thanks Shot, that might be handy. I'm prototyping a different circuit altogether.
Interesting choice to use the 4301 opamp to drive the outside world....won't be happy with anything less than a 2kOhm load..
Interesting choice to use the 4301 opamp to drive the outside world....won't be happy with anything less than a 2kOhm load..
ruairioflaherty
Well-known member
Bumping this again, anybody have one or two laying around?
![[silent:arts]](https://cdn.imagearchive.com/groupdiy/data/avatars/m/0/172.jpg?1620371656){kind=avatar}
[silent:arts]
Well-known member
I have a 4320 demo board settling dust if you are interested.
ruairioflaherty
Well-known member
[silent:arts] said:
Thanks Volker, I hadn't looked closely at that part before. I'm not sure it would have the headroom for my intended application/experimentation running off a 5V supply
ruairioflaherty
Well-known member
Hi all,
I'm back on the hunt for one of two of these That Corp 4301 demo boards. I could order new but hoping someone has some in the drawer unused so I can save a little.
I have lots of nice things to trade!
If anyone in the U.S. has some 4301P I could use 4.
Cheers,
Ruairi
I'm back on the hunt for one of two of these That Corp 4301 demo boards. I could order new but hoping someone has some in the drawer unused so I can save a little.
I have lots of nice things to trade!
If anyone in the U.S. has some 4301P I could use 4.
Cheers,
Ruairi
Similar threads
