Re: Feeler: Original style 1081 cases
« Reply #40 on: September 12, 2017, 07:15:52 PM »
Great! I would be interested for 8 boxes.


Potato Cakes

Re: Feeler: Original style 1081 cases
« Reply #41 on: September 27, 2017, 03:51:45 AM »
If there will be PCBs available as well, I would definitely take 2, possibly 4. I have an upcoming project that these would be most helpful.

Thanks!

Paul

kvintus

Re: Feeler: Original style 1081 cases
« Reply #42 on: October 01, 2017, 03:31:15 PM »
1pcs for me please.
...not perfect, but close enough for rock 'n' roll...

API

Re: Feeler: Original style 1081 cases
« Reply #43 on: October 03, 2017, 11:44:02 AM »
Hi guys.

Sorry for not keeeping you updated lately, but have been busy with yet another console restoration.

But i do have some good news, i have found a switchcap that will work for the lower four switches.
They look slighly different and the surface is slighltly concave, but they will work for me.
This is the only switchcap i have found that have the same measurments as the original and will fit on a ITT style switch.
It also should be possible to engrave this style, but i will look into this next week.
Will post pics below.

I have also sorted out the pressnuts and screws, and have decided that all will be M2.5 to keep the original look.

As soon as the prototype is done i will post pictures here and start a new thread for orders.
I do hope everyone that previously expressed interest is still in for some :)

« Last Edit: October 03, 2017, 11:50:28 AM by API »

API

Re: Feeler: Original style 1081 cases
« Reply #44 on: October 03, 2017, 11:52:35 AM »
sideview

API

Re: Feeler: Original style 1081 cases
« Reply #45 on: October 03, 2017, 11:53:10 AM »
backview

Re: Feeler: Original style 1081 cases
« Reply #46 on: October 03, 2017, 12:05:18 PM »
Very nice!  ::)

lolo-m

Re: Feeler: Original style 1081 cases
« Reply #47 on: January 09, 2018, 08:31:43 AM »


As soon as the prototype is done i will post pictures here and start a new thread for orders.
I do hope everyone that previously expressed interest is still in for some :)



I will take 2 for sure... And depending on when you'll be ready, more. (I would love to have 10 of them but maybe my wallet won't allow me to buy them so 2 for sure).
Hard to be a punk... But sometimes you have to...

API

Re: Feeler: Original style 1081 cases
« Reply #48 on: January 09, 2018, 08:37:10 AM »
Hi all.

I was actually going to post today in this thread since i reccieved the first prototype of the cases yesterday!
There is still some more tweaking to do so will do another one before i post any pics.

Re: Feeler: Original style 1081 cases
« Reply #49 on: January 09, 2018, 12:07:48 PM »
Interested in 16 depending on quality......


API

Re: Feeler: Original style 1081 cases
« Reply #50 on: January 09, 2018, 01:28:15 PM »
Quality will be as good as the originals.
Will get in touch with everyone that expressed interest once i have the final prototype ready.

Re: Feeler: Original style 1081 cases
« Reply #51 on: January 09, 2018, 02:25:44 PM »
ok

Winetree

Re: Feeler: Original style 1081 cases
« Reply #52 on: January 09, 2018, 02:35:22 PM »
2 or more depending on price

Re: Feeler: Original style 1081 cases
« Reply #53 on: January 11, 2018, 07:56:39 PM »
Also looking for 8 1084 frames ............. :o

Jarek

Re: Feeler: Original style 1081 cases
« Reply #54 on: January 12, 2018, 02:46:26 AM »
I'd take 2 or 4. Depends on the price.
Btw... Protos looks very nice. Well done.

wmarden

Re: Feeler: Original style 1081 cases
« Reply #55 on: January 14, 2018, 05:00:43 PM »
I would like at least a pair of these baby's! Very awesome!

dustbro

Re: Feeler: Original style 1081 cases
« Reply #56 on: January 14, 2018, 07:20:01 PM »
I could do 4

API

Re: Feeler: Original style 1081 cases
« Reply #57 on: January 15, 2018, 01:35:42 PM »
Thanks guys, i have put you on the list.

djn111

Re: Feeler: Original style 1081 cases
« Reply #58 on: January 16, 2018, 06:20:29 AM »
Hello,

Great job !

I could be in for 4 and 4 without front panel (1063), all depending on the money thing.

Regards DJN

djn111

Re: Feeler: Original style 1081 cases
« Reply #59 on: January 16, 2018, 06:22:38 AM »
Hello,

And one more thing, if somebody has a unbuild kit from Tommy Jones, and can make good scan's (600dpi >) of both sides of the PCB's I am happy to make new pcb files for them.

DJN