donnysparks
Well-known member
you guys have inspired me to finally rack the am16 that's been staring at me all this time. also, its time to stop spying and start posting...
[quote author="scott_humphrey"][quote author="JLM Audio"]Remember the AM16 output must be loaded by 600ohms to keep the frequency response flat. If you do not load the output you will have a 1 to 3dB rise by 20kHz which rises to about 6 to 8dB at around 40khz. Doesn't sound much but in listening term it is the difference between warm or harsh.
Joe
www.jlmaudio.com[/quote]
I'm confused here. wouldn't just about any piece of gear being fed by the am16 output provide at least a 600 ohm load? if you don't mind, what's an example of a situation meeting your criteria and one not?
also, the JLM Go Between and JLM DI Kit look very interesting. would those work with the AM16?
and Rob,
"Just a small point but if you have these mic amps set for +24dBm operation the harmonic generation is greater by 0.25% than if you have them set for +18dBm."
is that desireable harmonic generation as in even harmonics?
and Scott,
as Sleeper asked, what ARE those big caps off of the connector doing?
I am in constant awe of what you people are able to cook up!
thanks in advance for any help.
--donnysparks
[quote author="scott_humphrey"][quote author="JLM Audio"]Remember the AM16 output must be loaded by 600ohms to keep the frequency response flat. If you do not load the output you will have a 1 to 3dB rise by 20kHz which rises to about 6 to 8dB at around 40khz. Doesn't sound much but in listening term it is the difference between warm or harsh.
Joe
www.jlmaudio.com[/quote]
I'm confused here. wouldn't just about any piece of gear being fed by the am16 output provide at least a 600 ohm load? if you don't mind, what's an example of a situation meeting your criteria and one not?
also, the JLM Go Between and JLM DI Kit look very interesting. would those work with the AM16?
and Rob,
"Just a small point but if you have these mic amps set for +24dBm operation the harmonic generation is greater by 0.25% than if you have them set for +18dBm."
is that desireable harmonic generation as in even harmonics?
and Scott,
as Sleeper asked, what ARE those big caps off of the connector doing?
I am in constant awe of what you people are able to cook up!
thanks in advance for any help.
--donnysparks