G
gerardmanvuca
Guest
My plan is to build a 1272 that would have similar sonic characteristics to the actual original Neve. The problem is that I'm not sure which transformer to go for.
I know that AMS/NEVE use Carnhill trannys for their 1272 outboards, I have looked at a few post and Sowter
trannys seem to be used a lot for this project, why Sowter over Carnhill?
In this post http://www.groupdiy.com/index.php?topic=6518&start=0&postdays=0&postorder=asc&highlight=
'Mbira' lists recommended Trannys for specific projects, according to this source
- input tranny = Carnhill VTB9046
- output tranny = Carnhill VTB9049
Has anyone ever tried these ones on a 1272 hotrod, if so. Any good?
:sam: gerard
I know that AMS/NEVE use Carnhill trannys for their 1272 outboards, I have looked at a few post and Sowter
trannys seem to be used a lot for this project, why Sowter over Carnhill?
In this post http://www.groupdiy.com/index.php?topic=6518&start=0&postdays=0&postorder=asc&highlight=
'Mbira' lists recommended Trannys for specific projects, according to this source
- input tranny = Carnhill VTB9046
- output tranny = Carnhill VTB9049
Has anyone ever tried these ones on a 1272 hotrod, if so. Any good?
:sam: gerard