VanguardAudioLabs
Well-known member
you can't get these from AKG anymore, and whenever I repair a 414 with a broken frame chances are at least one of these is missing. As a right-to-repair supporter this bothers me a lot, so I designed one you can 3D print on your own.
You can grab the STL and STEP files here, since I can't upload them as attachments to this post.
https://www.vanguardaudiolabs.com/a...overs-for-the-c414bsso-we-designed-a-new-one/
These work with the C414, C414EB, C414EB P48 (with the exception of the front cover), C414B-ULS, C414B-TLii, and C414B-TL.
Note the images below are before I added the proper chamfer to the top out-facing edge. The files include the chamfer.
You can grab the STL and STEP files here, since I can't upload them as attachments to this post.
https://www.vanguardaudiolabs.com/a...overs-for-the-c414bsso-we-designed-a-new-one/
These work with the C414, C414EB, C414EB P48 (with the exception of the front cover), C414B-ULS, C414B-TLii, and C414B-TL.
Note the images below are before I added the proper chamfer to the top out-facing edge. The files include the chamfer.
