soundcollage
Well-known member
- Joined
- Dec 11, 2007
- Messages
- 71
many thanks to bernbrue! many thanks to the knowledgable members of the forum! ok i lied a bit- i used 3 electros in the phantom section as i would have needed another 3 space rack to fit another 2000µf of film caps in, but i made them easily accessible to any future techs.
monstrous power 'brick' front side
I had to mount the 47µf solens vertically or everything would not have fit, so i put all the power circuitry on the boards i used to sandwich them.
super-over-rated resistors are, shockingly, cheaper than appropriate ones and 2 single solder turrets.
BEEFY
seperate shielded twisted pair for all ten tubes, because i'm ridiculous.
16lbs of edcor iron hanging off the back of this one.
currently working with my wife to layout the front panel graphics to silk screen on.
hopefully the 6 cinemag transformers will arrive sometime this year.
monstrous power 'brick' front side
I had to mount the 47µf solens vertically or everything would not have fit, so i put all the power circuitry on the boards i used to sandwich them.
super-over-rated resistors are, shockingly, cheaper than appropriate ones and 2 single solder turrets.
BEEFY
seperate shielded twisted pair for all ten tubes, because i'm ridiculous.
16lbs of edcor iron hanging off the back of this one.
currently working with my wife to layout the front panel graphics to silk screen on.
hopefully the 6 cinemag transformers will arrive sometime this year.