khstudio
Well-known member
Sorry if this has been asked before but:
Will a 600:600 tranz work (Good) in place of 10k:10k with a 10k resistor added to the secondary of the 600:600 :?:
... or is there more to it?
I'm throwing together another LA2A & like using 1:1 (10k:10k) for the inputs.
The 600:600 trannys are from an old Yamaha boards Main & Aux/Buss outputs & are Tamara.
I'm going to try the Edcor 10k:600 for the output.
The last 2 LA2A's I built I used the JENSEN's which sound GREAT but wanted to try this out & save the $200+.
Thanks in advance.
Will a 600:600 tranz work (Good) in place of 10k:10k with a 10k resistor added to the secondary of the 600:600 :?:
... or is there more to it?
I'm throwing together another LA2A & like using 1:1 (10k:10k) for the inputs.
The 600:600 trannys are from an old Yamaha boards Main & Aux/Buss outputs & are Tamara.
I'm going to try the Edcor 10k:600 for the output.
The last 2 LA2A's I built I used the JENSEN's which sound GREAT but wanted to try this out & save the $200+.
Thanks in advance.