A super-great day in the DIY HEAVEN'´¨-.

[Soeren_DK]

Hey everybody

This was the day I went to the city of DIY. Aarhus. :grin:

Day startede this morning with a little walk with my dog. Great morning and this was something I forgot to photograph. Sorry. Went to the station in my little town and jumpend in the train and drov for about 3 hours. Without the big latency.

After a little trip with the bus and a walk I finally discoverered the golden numbers on the house - 21. :razz: Wuhuu!

From outside this house looks like all outher but on the inside. :grin:

I meet Jakob in his office sitting infront of the computer. :grin: He had never seen me before and we had only been talking here so I was a little nervous but after a little time I got this warm filling in my body like when your sitting infront of the fireplace a friday everning with a glas of wine

He showed me around in this lost city with very old and vintage gear I never had seen before standing every where. We passed on into the basement where my eyes came on a job, observe all the things there was laying around :shock:

http://www.mentol.dk/pics/3.jpg

http://www.mentol.dk/pics/4.jpg

http://www.mentol.dk/pics/5.jpg

http://www.mentol.dk/pics/6.jpg

http://www.mentol.dk/pics/7.jpg

http://www.mentol.dk/pics/8.jpg

After a long talk about everything we startede with the G9 preamp. I had had some trouble with humm and Gain problem.

After a little research and some printouts ( :grin: ) Jakob discorerered that some resistores had the wrong numberes. The gain was only active in the first 4 pos.. The problem was that I had forgot to check all the resistores, ALWAYS DO THAT. I used a 680K ohm and the right one was a 680 ohm so we fixed that and the gain problem was done

http://www.mentol.dk/pics/10.jpg

http://www.mentol.dk/pics/11.jpg

The hum problem was a little more difficult so there was used a time to soulver this problem. After some measures he found the problem. The toriod that transfer the power from 15V to 250 V was only delivering 220V (I can remember this numbers so correct me if I am wrong)

And some folli around the 3 frist wires in the group of 5 made my little baby very happy, AND I AM HAPPY... :razz: :wink: :grin:

http://www.mentol.dk/pics/13.jpg

The SSL also got a check and here was no problems.. Wuhuu...

We went to the Studio to check the units...

http://www.mentol.dk/pics/16.jpg

http://www.mentol.dk/pics/19.jpg

http://www.mentol.dk/pics/20.jpg

We tried the units on a relly setup. Damn this speakersetup sounded great.

http://www.mentol.dk/pics/22.jpg

But this man, Jakob Erland can do somethings with his mind that I never had seen before.

Look at this machines.
This is a (hmmm what a they called) hmm a machine to make frontpaneles and it is made of old junk from a resycling place. :thumb:

And this.
He make his own transformeres.... with this.... :grin:

Ohh this was the best day in my life.. I am so happy. This man Jakob is a "big" man. He is great :green: He helped my and i learned a lot today.
Thanks Jakob.
And Gustav for the prints and the support, hope to see you some day. I like to see your studio..

And this forum. Without you this was not possible..

I am very tirred and I am sorry for the spelling.

Good night everyone. THANKS :wink:

 

[Jazzy_Pidjay]

 

[Kev]

[quote author="Soeren_DK"]... I am so happy. This man Jakob is a "big" man. He is great :green: He helped my and i learned a lot today.
Thanks Jakob. [/quote] :green:
and that's the whole point
and yes many thanks to Jakob and the other tireless Group DIY helpers.

diy,diy
happy, happy
DIY

 

[dufo]

I presume the blonde bloke is Jakob?

Looks like he should be in the movies instead of doing DIY! :grin: :grin: :grin:

 

[radiance]

Great story man.
:thumb:

 

[Bauman]

WOW COOL!!

 

[JustinS]

Ahhh... much love all around... That's what its all about!! And thanks again Jakob :thumb: :thumb:

Justin.